Boston-acoustics VS 344 User Manual Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 44
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
4
Adjustable Feet
Each of the VS Series models,
exceptVS344,isequippedwith
adjustable feet that lets you
change the vertical angle of the
speaker to suit your installation.
The VS speakers are supplied
with an open ended wrench and
a hex wrench to set the position
of the adjustable feet. Put the
hex wrench in the hole in the
bottom of the adjustable foot.
Put the open ended wrench
around the recesses in the base of
the cap. Turn the wrenches to set
the position of the foot.
TheVS336andVS344aresupplied
with carpet spikes. If the speakers
are placed on a carpeted floor
replace the feet with the carpet
spikes. This provides additional
stability and coupling for the
speaker. Care should be used with
the carpet spikes to avoid damage
to the floor or injury.
Wall-Mounting
TheVS240,VS260,VS224,andVS325Ccanbewall-mountedusing
the supplied mounting bracket. Use the supplied hex wrench to
remove the foot mounting screw and the foot. Then install the
threaded mounting posts in the back of the cabinet.
Fasten the mounting plate to the wall with appropriate hardware.
See the Note below. Be sure it is level. Connect the speakers. Insert
the heads of the mounting posts through the keyhole openings in
the mounting plate. Lower the speaker to seat the mounting posts
inthemountingplate.Whenthespeakerispositionedhorizontally
the vertically positioned keyhole openings are used.
NOTE: The customer is responsible for the correct selection and use
ofmountinghardware(availablethroughhardwarestores)thatwillensuretheproperandsafewall-mountingofthespeakers.
To change the angle of the speaker . . .
. . . rotate the feet.
Use the open ended
and hex wrenches to
set the position of the foot.
Reposition the foot
for horizontal use
mounting post
mounting plate
wall
Page view 3
1 2 3 4 5 6 7 8 9 ... 43 44

Comments to this Manuals

No comments